THOMSON RD1000 - Page 43

THOMSON RD1000 / RD1002
Page 43
Receiver Descrambler - User Manual (release 7.3.1)
Edition 2 – October 2010
4. Use the and buttons to move the cursor to the
PID to be selected or deselected, then press the
button.
5. Press the button to edit the selection.
6. Use the and buttons to change the selection
status.
7. Press the button to save the selection.
Note: The short name is listed (if available) with the Service. The PIDs video type and audio language
information is shown along with the PID.
Note: The symbol “♦” denotes that the PID is a selected PID (being sent to the CAM). The symbol “◊”
denotes that the PID is not selected (not being sent to the CAM).
PIDs No Longer in the Input PMT
The selected PIDs that are no listed in the PMT are listed followed with a “*” under the associated CAM.
The list contains the Services, with PID selection available after selecting the Service. These PIDs can
be selected or deselected. It they remain selected and appear in the PMT, those PIDs will be sent to
the CAM for decryption.
1. Use the and buttons to move the cursor to a
“*”’ed Service, then press the button.
2. Use the and buttons to move the cursor to the
PID to be selected or deselected, then press the
button.
3. Use the and buttons to change the selection
status.
4. Press the button to save the selection.
5. The display will return to the PID selection list (Step 3)
with the correct “♦” or “◊”.
Note: When the Service no longer has PIDs that are not in the PMT, it will not be listed as a “*”’ed
Service.
 CA Systems RDS1 
SVC:1030 CBCMB *
♦x1111 MPEG2 Video
►◊x1114 ATSC AC3
 CA Systems RDS1 
SVC:1030 CBCMB *
♦x1111 MPEG2 Video
►♦x1114 ATSC AC3
 CA Systems RDS1 
SVC:816 ABCHE
Svc:892 CBCMH
► SVC:1030 CBCMB *
 CA Systems RDS1 
SVC:816 ABCHE
♦x1234 MPEG2 video
►◊x1235 ATSC AC3