THORLABS Vytran FFS2000 Series User Manual

FFS2000 Series Chapter 3: Description
Rev B, July 21, 2017 Page 15
 Mandrel: During the proof test, the fiber is wrapped around the mandrels. The right mandrel will rotate,
applying tension to the fiber.
 Clamp: The clamps hold the fiber taut between the mandrels and keep it from slipping during the proof
test.
 Release Button: The buttons are used to release the tension on the clamps, allowing the fiber to be
inserted or removed from the mandrel.
 Ramp Screw: The screw is used to adjust the ramp rate (the rate at which fiber tension increases during
the proof test). To decrease the ramp rate turn clockwise; to increase the ramp rate turn
counterclockwise.

THORLABS Vytran FFS2000 Series Specifications

General

Brand	THORLABS
Model	Vytran FFS2000 Series
Category	Laboratory Equipment
Language	English