87
Chapter 11 – Record User Data
Use this table to record values set for the seeder. This data is useful in
case of factory reset, upgrading the ECU, or for service and support
purposes.
11.1. Recording user data
Setting Value
Wheel factor
Seeder width
Calibration factor Product 1 Name: Cal Factor:..............
Product 2 Name: Cal Factor:
Product 3 Name: Cal Factor:
Product 4 Name: Cal Factor:
Product 5 Name: Cal Factor:
Product 6 Name: Cal Factor:
Product 7 Name: Cal Factor:
Product 8 Name: Cal Factor:
Product 9 Name: Cal Factor:
Product 10 Name: Cal Factor:
Product 11 Name: Cal Factor:
Product 12 Name: Cal Factor:
Product 13 Name: Cal Factor:
Product 14 Name: Cal Factor:
Product 15 Name: Cal Factor:
Product 16 Name: Cal Factor:
Pulses / revolution
To Next Page
Loading...
