Topcon Apollo ISOBUS UT - Liquid;NH3 Tank Settings; Regulator Valve Drive Settings; Proportional Valve Drive Settings; Monitor Drive Settings

2.2. Setting up tanks
12
2.2.2. Liquid/NH3 tank settings
Drive Control Settings
Pressure
Settings
Pump Sense
Regulator valve Sensitivity
Close valve when
off
Reverse valve
Dump valve
Controller mode
Min on time
Max on time
Gain setting
PWM setting
Auto close valve
time
Pressure
sensor
Max pressure
Min voltage
Max voltage
Speed
monitoring
Pulses /
revolution
Proportional
valve
Add dither
Soft start
Soft stop
Dump valve
Min PWM
Max PWM
Controller
response
Pressure
sensor
Max pressure
Min voltage
Max voltage
Speed
monitoring
Pulses /
revolution
Monitor Dump valve
Pressure sensor
Min voltage
Max voltage
Max pressure