Topcon Apollo ISOBUS UT - Chapter 8: Setting Up Tank Pressure Alarms; Tank Pressure Sensor Function; Tank Pressure Alarm Configuration

8.7. Setting up tank pressure alarms
70
8.7. Setting up tank pressure alarms
Pressure transducer sensors may be fitted for liquid or NH3 tanks to
measure tank pressure. The tank pressure alarm can alert the operator
if the tank pressure is too high or too low relative to the set alarm
point.
1.
Select Settings Menu / Alarm Settings Menu / Tank
Pressure Alarms .
Configure the following alarms:
l Tank # Press. Low: The tank low pressure alarm is triggered
when the tank pressure falls below the set alarm point. # denotes
the tank number.
l Tank # Press. High: The tank high pressure alarm is triggered
when the tank pressure exceeds the set alarm point.