xi
Chapter 7 – External Keypad 57
7.1. Keypad setup 57
7.2. LED behavior 60
Chapter 8 – Alarm Settings 63
8.1. Managing seeder alarms 63
8.2. Setting up fan alarms 65
8.3. Setting up tank motor alarms 66
8.4. Setting up shaft alarms 67
8.5. Setting up tank gear alarms 68
8.6. Setting up tank alarms 69
8.7. Setting up tank pressure alarms 70
8.8. Setting up other alarms 71
8.9. Setting up no flow alarms 72
Chapter 9 – Advanced Settings 73
9.1. Configuring advanced settings 73
9.2. Upgrading ECU firmware 75
9.2.1. CM-40 Main ECU 75
9.2.2. CM-40 Aux ECU / EM-24 ECU 76
9.2.3. Verifying upgrade 77
Chapter 10 – Seeder Operation 79
10.1. Selecting the seeder operation screen 79
10.2. Selecting and filling tanks 83
10.3. Selecting and resetting area counters 84
10.4. Viewing diagnostics 85
Chapter 11 – Record User Data 87
11.1. Recording user data 87
Chapter 12 – Apollo ECU Information 89
12.1. Interpreting Apollo ECU LEDs 89
12.1.1. Power LEDs 89
12.1.2. Transmit LED 91
12.1.3. Receive LED 91
12.1.4. ECU Status LED 91
12.2. Apollo ECU error codes 93
12.2.1. Error levels 93
To Next Page
Loading...
