Topcon Apollo ISOBUS UT - Copying Implement Profiles from USB; Copying Profile from USB to Console

Chapter 2 – Seeder Settings
35
6. Select the profile to be saved to USB from the list.
7. Select the right arrow and select fs_usb. The selected profile is
saved to the USB.
Copy a profile from USB
1. Ensure the USB containing the profile to be copied is plugged into
the console.
2.
Select Profiles Setup from the Settings menu.
3.
Select the folder button , then select the transfer button .
4.
Select the left arrow , then select fs_usb. A list of files stored
on the USB is displayed.
5. Select the profile to be copied, then select the displayed .ini file.
The profile is copied to the console.