48
9. CONNECTING TO EXTERNAL DEVICES
3. Press [LIST] to display a list of all registered
devices (no devices are registered when the
instrument is shipped).
4. Press [SEARCH] in the "Serial" tab to search
about communication-ready Bluetooth devices in
the immediate vicinity of the instrument.
When the search is completed, their device name
and address are displayed in a list. Select a device
from this list and press [OK] to add to the Link
device list.
• Maximum number of devices registered: 6
• When registering a device manually, press
[Add] to display <Add device>. Input the device
name and Bluetooth address and press [OK].
Address should be 12 characters (numbers 0 to
9 and letters from A to F) in length.
To Next Page
Loading...
