9. CONNECTING TO EXTERNAL DEVICES
51
3. Terminate the connection by the data collector.
PROCEDURE Bluetooth communication as "Master"
1. Complete the necessary DS settings for
Bluetooth communication.
"9.1 Wireless Communication using
Bluetooth Technology " PROCEDURE Set
Bluetooth communication mode to "Master""
and " PROCEDURE Registering Bluetooth
companion devices used as "Slave""
2. Start communication
When the DS is set as the "Master" device, the
[Connect] is allocated to the fourth page of
Observation mode. When [Connect] is pressed
the DS searches for the device selected in "Link"
and a connection starts. When a connection has
been successfully established is displayed
in the status bar.
The establishing of a connection can also be
initiated by tapping in the status bar.
Communication status:"5.4 Starkey Mode"
3. Press [Cancel] in the fourth page of Observation
mode to terminate the connection.
A connection can also be terminated by tapping
in the status bar.
To Next Page
Loading...
