Specifications
HiPer Pro Operator’s Manual
A-10
Connector Specifications
The following sections list HiPer Pro connector details.
Radio (Modem) RF Connector
The Satel (UHF) modem connector type (Table A-5) is a BNC female
RF connector.
Power Connector
The power connector (Figure A-1) is a sealed receptacle, 5 pin, ODU
part number G80F1C-T05QF00-0000.
Figure A-1. Power Connector
Table A-6 gives power connector specifications.
Table A-5. UHF Modem Connector Specifications
Type Signal Name Dir Details
BNC Modem I/O I/O RF output from modem antenna
Table A-6. Power Connector Specifications
Number Signal Name Dir Details
1 Power_INP P 6 to 28 volts DC input
2 Power_INP P 6 to 28 volts DC input
3 Power_GND P Ground, power return
4 Power_GND P Ground, power return
To Next Page
Loading...
