Topcon HiPer Pro - Standard Package Contents

Introduction
HiPer Pro Operator’s Manual
1-6
Depending on your options, capabilities of the receiver include:
• Co-Op Tracking
• Multipath reduction
• Wide area augmentation system (WAAS)
• Adjustable phase locked loop (PLL) and delay lock loop (DLL)
parameters
• Dual-frequency static, kinematic, real-time kinematic (RTK), and
differential GPS (DGPS) survey modes
• Auto data logging
• Setting different mask angles
• Setting different survey parameters
• Static or dynamic modes
The range of the HiPer Pro is 2–4 miles (3.22–6.44 km).
Standard Package Contents
The HiPer Pro comes in a real-time kinematic (RTK) package with
two receivers, one as a Base Station and the other as a Rover Station
(also, refer to the packaging instruction card). The contents of this
package include:
• Two HiPer Pro receivers
•LitePole
• Tripod, tribrach, and adapter
• Topcon Tools™ software (optional)
• Cables, connectors, and adapters
•Literature