Topcon HiPer Pro - Receiver and Power Board Firmware

Loading New Firmware
P/N 7010-0681
4-23
Figure 4-14. FLoader Main Screen
See the following sections to load the appropriate firmware.
Receiver and Power Board Firmware
Receiver and power board firmware is released as a compressed file
that you download and decompress. This file contains the following
three files:
• ramimage.ldr – the Receiver board RAM file
• main.ldp – the Receiver board Flash file
• powbrd.ldr – the Power board RAM file
NOTICE
NOTICE
You must load all three files when loading new firmware.
These files must come from the same firmware package.