Connecting the Receiver and a Computer
P/N 7010-0681
2-11
Establishing a Wireless Connection
The HiPer Pro receiver contains Bluetooth wireless technology that
allows file transfer and synchronization between the receiver and any
other external device that supports Bluetooth wireless technology; for
example, an iPAQ, or a computer with USB-to-Bluetooth adapter or
PCMCA-to-Bluetooth adapter installed.
NOTICE
NOTICE
Changing the receiver’s Port B default settings will affect
the Bluetooth link. The default settings for Port B are:
115200 bps, 8 data bits, 1 stop bit, no parity, and no
handshaking.
The receiver and external device connection procedure varies slightly
depending on the type of external device used. In general, the
connection procedure is as follows:
NOTICE
NOTICE
Refer to your Bluetooth-enabled external device
documentation for detailed connection information.
1. Turn on a Bluetooth-enabled external device and the receiver. The
default external device mode is Master; the receiver’s Bluetooth
module mode is Slave.
2. Instruct the external device (Master) to search for the receiver
(Slave).
3. Once the Master device detects the receiver, use the procedure
described in the external device’s documentation to connect it
with the receiver.
4. Once connected, continue with Step 1 in “Establishing a PC-
CDU Connection” on page 2-13.
To Next Page
Loading...
