Topcon MR-2 - Set up the Receiver TCP Port

Configure the Receiver
31
P/N: 1011907-01
Configuration
Figure 33: TRU – Serial Port Settings
5. Click OK to return to the Receiver Ports screen.
If you want to set up additional messages, follow the process below. Otherwise click X to return to the Receiver
Settings screen, then click Back to return to the TRU main screen.
Set Up The Receiver TCP Port
1. In TRU, click DeviceApplication ModeReceiver ManagingReceiver Settings. The Receiver
Settings screen appears (
Figure 34).
Figure 34: TRU – Receiver Settings
2. Click Ports, then click the TCP tab. The Receiver Ports screen for the TCP tab appears (Figure 35).
3. Double-click the appropriate TCP Port name (Figure 35). The Settings screen for that port appears.