Configure the Receiver
39
P/N: 1011907-01
Configuration
4. Click OK to return to the Receiver Ports screen, then click X to return to the Receiver Settings screen.
5. Click Back to return to the TRU main screen.
Once the receiver is configured, the configuration remains until changed using TRU or by clearing the NVRAM.
For more details on the settings available for configuring receivers, see the
TRU Online Help
embedded in the
software.
Verify Receipt of Differential Corrections (RTK Rover Only)
1. For RTK Rover receivers, click Status (Figure 46) to ensure the receiver obtains differential correction. The
Status screen appears.
Figure 46: TRU – Main Screen and Status Screen
To Next Page
Loading...
