Configure the Receiver
33
P/N: 1011907-01
Configuration
5. Click OK to return to the Receiver Ports screen.
6. If you want to set up additional messages, follow the process below. Otherwise click X to return to the
Receiver Settings screen, then click Back to return to the TRU main screen.
Set Up Additional Messages (Optional)
1. In the Settings screen for your selected serial port, click Messages. The Messages screen appears
(
Figure 37 on page 33).
Figure 37: TRU – Serial Port Messages
2. Right-click in the screen and click Add new messages. The Receiver Message List screen appears
(
Figure 38 on page 34).
Disabling authentication or changing the port number is done in the TCP tab.
To Next Page
Loading...
