Topcon MR-2 User Manual

Updating Firmware
48
P/N: 1011907-01
Configuration
Updating Firmware
Updating firmware on the receiver requires an Ethernet connection. If your unit has two B125 boards, each
board requires an update, and each board has a different IP address. The IP address for the main board is
192.168.0.9. The IP address for the auxiliary board is 192.168.0.10. Follow the below procedure for both
boards.
1. Download the latest firmware build to your PC.
2. Open TRU and click DeviceApplication ModeReceiver Managing.
3. Connect to the receiver using an Ethernet connection (Figure 59).
Figure 59: TRU – Ethernet Connection
4. Click Connect.
5. Once connected, click DeviceApplication ModeFirmware Loading.
Do not unplug the power or Ethernet connection during the firmware update process.
See “Connect to TRU Using Ethernet” on page 25 for more information.

Topcon MR-2 Specifications

General

Brand	Topcon
Model	MR-2
Category	Receiver
Language	English