Topcon MR-2 - Ethernet Connector

Connector Specifications
61
P/N: 1011907-01
Specifications
Ethernet Connector
The Ethernet connector is a sealed receptacle located on the front of the receiver.
Figure 66: Ethernet Connector
Table 8 provides the Ethernet connector specifications.
12 GND Ground
a. COM 3 attaches to a secondary B125 board.
Table 7. Main Connector Specifications
No.
Signal
Name
Direction
SHIELD
PIN 6
PIN 5
PIN 4
PIN 8
PIN 3
PIN 2
PIN 1
PIN 7
Table 8. Ethernet Connector
Specifications
No.
Signal
Name
1 PWR
2 GND
3 GND
4 TX-
5 RX+
6 TX+
7 PWR
8 RX-