Topcon MR-2 - Set up the Receiver Serial Ports

Configure the Receiver
37
P/N: 1011907-01
Configuration
Set Up the Receiver Serial Ports
1. In the Receiver Settings screen, click Ports (Figure 42). The Receiver Ports screen appears.
Figure 42: Receiver Settings
2. Double-click the appropriate Serial Port name (Figure 42). The Settings screen for that port appears.
3. In the Settings screen, select the following (Figure 43):
• Input Mode – Select RTCM 3.x
• Output Mode – None
Figure 43: Serial Port Settings
4. Click OK to return to the Receiver Ports screen, then click X to return to the Receiver Settings screen.
5. Click Back to return to the TRU main screen.