Tormach 8L - Page 6

©Tormach® 2021
Specifications subject to change without notice.
Page 6 UM10753: 8L Operator's Manual (Version 0321B)
For the most recent version, see tormach.com/support
4.5 Unpack the Machine Crate 25
4.6 Install Core Components 26
4.6.1 Lift and Move the Machine 26
Secure the Machine to the Stand 27
Secure the Machine to a Workbench 27
4.6.2 Install the Controller Arm 28
Install the PathPilot Operator Console 29
Install the Monitor 31
Install the PathPilot Controller 32
4.6.3 Verify the Installation 33
Power On the Machine 33
Power Off the Machine 35
Verify Limit Switch Function 35
Verify Axes Function 35
Verify Spindle Function 36
4.7 Install Accessory Components 36
4.7.1 Install the Quick Change Tool Post Kit 37
Required Tools 37
Install the Quick Change Tool Holder 37
Install the Tool into the Quick Change Tool Holder 37
To Use a Boring Bar 38
Align the Tool 38
4.7.2 Install the Machine Stand Coolant Kit (PN 50931) 39
Adjust the Coolant Pump Motor Strapping 40
4.8 Set Up the PathPilot Controller 40
4.8.1 Specify the Date and Time 40
4.8.2 Specify the Keyboard Language 40
4.8.3 Configure the Optional Touch Screen Kit 40
4.8.4 Update PathPilot 40
SYSTEM BASICS
41
5.1 System Reference 42
5.1.1 Spindle 42
About the Spindle 42
5.1.2 Axes 42
5.2 Basic Controls Reference 42
5.2.1 Machine Controls 42
5.2.2 PathPilot Interface 42
BASIC OPERATIONS
43
6.1 Start the Machine 44
TABLE OF CONTENTS