Understand that certain installation, maintenance, and
troubleshooting procedures — for the machine and certain
accessories — require access to or modification of wiring
inside of the electrical cabinet. Only qualified electrical
machinery technicians shall perform these procedures.
Confirm that the mains voltage conforms to requirements
before connecting the machine.
For more information, see "Electrical and Power
Requirements" (page16).
Confirm that the machine installation meets all codes and
regulations of your locality.
Confirm that electrical connections are performed by a
certified electrician.
Lock the electrical cabinet door and remove the keys when
the machine is not being serviced to prevent unqualified or
unauthorized personnel from accessing the electrical
cabinet.
Never operate the machine with the electrical cabinet
door open.
Never reach into the electrical cabinet with the machine
powered on.
Never modify the machine's electronics.
Never drill into the electrical cabinet.
©Tormach® 2024
Specifications subject to change without notice.
Page 12 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A)
For the most recent version, see tormach.com/support
1: SAFETY
To Next Page
Loading...
