Tormach AF50+ - Default Chapter; Table of Contents

SAFETY
9
1.1 Safety Overview 10
1.1.1 Safety Messages 10
Personal Injury 10
Property Damage 10
1.2 Machine Safety 10
1.2.1 General Shop Safety 10
1.2.2 Operational Safety 10
General 10
Blades 11
Workholding 11
1.2.3 Electrical Safety 11
ABOUT YOUR MACHINE
13
2.1 Machine Specifications 14
SITE REQUIREMENTS
15
3.1 General Site and Space Requirements 16
3.1.1 Site Requirements 16
3.1.2 Space Requirements 16
3.2 Electrical and Power Requirements 16
3.2.1 Electrical Requirements 16
3.2.2 Power Requirements 16
3.3 Air Requirements 17
INSTALLATION
19
4.1 Before You Begin 20
4.2 Move the Crate 20
4.3 Unpack the Crate 20
4.4 Set Up the Machine 22
4.4.1 Level the Machine 22
4.4.2 Install the Coolant Screen 22
4.4.3 Install the Blade Tensioner Handles 23
4.4.4 Install the Outfeed Guide 23
4.4.5 Remove the Shipping Bolts on the Rear Cage 24
4.4.6 Verify Motor Belt Tension 24
4.4.7 Make Air Connections 24
Air Requirements 25
4.5 Verify the Installation 25
4.5.1 Verify the Proximity Sensor Installation 25
TABLE OF CONTENTS