Copyright
Notice
Information is subject to change without notice by Tormach, Inc. For the most recent version of this document,
see tormach.com/support.
You're welcome to make copies of this document for evaluating, learning about, and/or using the machine.
You may not charge for any copies you make beyond the cost of printing.
Unless otherwise noted, companies, names, and various data used in examples are fictitious.
To the Reader
We're dedicated to continually improving our documentation and products, and welcome any clarifications,
corrections, or suggestions.
Credits
Tormach®, AF50+ Autofeed Bandsaw®, and PathPilot® are trademarks or registered trademarks of Tormach,
Inc. Our milling machines and accessories are covered by one or more of the following U.S. Patents: 7,386,362;
D606,568; D612,406; D621,859; and other patent(s) pending.
Other product or company names may be the trademarks of their respective owners.
Copyright © Tormach, Inc. 2024
Page 2
To Next Page
Loading...
