4.5.3 Power Off the Machine
1. Push the Emergency Stop button on the operator panel
to lock it into the disabled position.
2. Turn the Main Disconnect switch to OFF.
Mains power is disconnected from the machine.
You're done verifying that you can power off the
machine.
You've successfully verified the installation of your machine.
©Tormach® 2024
Specifications subject to change without notice.
Page 26 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A)
For the most recent version, see tormach.com/support
4: INSTALLATION
To Next Page
Loading...
