Tormach AF50+ - Page 5

©Tormach® 2024
Specifications subject to change without notice.
Page 5 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A)
For the most recent version, see tormach.com/support
TABLE OF CONTENTS
10.2 Motor and Electrical Troubleshooting 59
10.2.1 Coolant Pump Doesn't Work 60
10.2.2 Error on the Control Panel 62
Control Panel Displays CS 62
Control Panel Displays E** 62
Bandsaw Error Codes Reference 62
10.2.3 Machine Doesn't Start or a Panel Breaker Trips 64
10.2.4 Machine Stalls or It's Underpowered 65
10.2.5 Noise or Machine Vibration 67
10.3 Mechanical Adjustments 67
10.3.1 Adjust the Blade Guides 67
10.3.2 Adjust the Blade Tracking 68
10.3.3 Adjust the Blade Brush 72
10.3.4 Adjust the Height of the Infeed Table 73
10.3.5 Adjust the Jaws 74
Align the Fixed Jaw 74
Adjust the Fixed Clamp Jaw 75
DIAGRAMS AND PARTS LISTS
77
11.1 Base Casting Exploded View 79
11.2 Base Casting Parts List 80
11.3 Head Casting Exploded View 82
11.4 Head Casting Parts List 83
11.5 Infeed Table Exploded View 85
11.6 Infeed Table Parts List 86
11.7 Stand Exploded View 88
11.8 Stand Parts List 89
11.9 Blade Wheel Exploded View 90
11.10 Blade Wheel Parts List 91
11.11 Motor Assembly Exploded View 92
11.12 Motor Assembly Parts List 93
11.13 Gear Box Assembly Exploded View 94
11.14 Gear Box Assembly Parts List 95
11.15 Sliding Blade Guide (Parent) Exploded View 96
11.16 Sliding Blade Guide (Parent) Parts List 97
11.17 Sliding Blade Guard (Child) Exploded View 98
11.18 Sliding Blade Guide (Parent) Parts List 99
11.19 Blade Tensioning Kit Exploded View 100
11.20 Blade Tensioning Kit Parts List 101
11.21 Lift Cylinder Assembly Exploded View 102
11.22 Lift Cylinder Assembly Parts List 103
11.23 Coolant System Exploded View 104
11.24 Coolant System Parts List 105
PNEUMATIC SCHEMATICS
107