10: TROUBLESHOOTING
©Tormach® 2024
Specifications subject to change without notice.
Page 63 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version
0324A)
For the most recent version, see tormach.com/support
Error Description
E15
The infeed table retract stroke timed out (on the initial stroke).
E16
The infeed table advance stroke timed out.
E17
The infeed table retract stroke timed out (on a subsequent stroke).
While troubleshooting error codes, examine the Stroke LEDs on the control panel, which correspond to the proximity sensors on the
bandsaw. If the LED light is illuminated, the proximity sensor is active.
l ×1 LED: Infeed (advance) proximity sensor
l ×2 LED:Outfeed (retract) proximity sensor
l ×4 LED:Saw down proximity sensor
l ×5 LED: Saw up proximity sensor
To Next Page
Loading...
