Tormach AF50+ - Page 66

10: TROUBLESHOOTING
©Tormach® 2024
Specifications subject to change without notice.
Page 66 UM10825: AF50+ Autofeed Bandsaw Operator's Manual (Version 0324A)
For the most recent version, see tormach.com/support
You May Need
To...
Probability How-To Steps Need More?
Rewire the
motor.
Low Inspect the motor wiring. If necessary, make the correct
connections.
For information, see "Electrical
Schematics" (page111).
Replace the
motor.
Low Test the motor. If necessary, repair or replace it. Create a support ticket with
Tormach Technical Support at
tormach.com/how-to-submit-a-
support-ticket for guidance on how
to proceed.