Toro Groundsmaster 3320-D - Page 349

DisassemblingtheBrake(continued)
6.Removetheadjusterspring(item13inFigure196).
7.Spreadtheupperendsofthebrakeshoes(item11inFigure196),and
removethestarwheelsocket,starwheeladjuster,andpivotnut.
8.Removethebrakeleverretainers(item14inFigure196).
9.Pullthebrakeleverfromthebrakeshoes.
10.Removethereturnsprings(items7and15inFigure196)andbrakeshoe
bypryingtheendofthespringupandoutofthebrakeshoe.Useabrake
springpliersoratbladescrewdriver.
11.Slidebothbrakeshoesfromthebrakespider,andremovetheshoesfrom
themachine.
AssemblingtheBrake
1.Slidethebrakeshoes(item11inFigure196)upontothebrakespider.
CAUTION
Thespringsareundertensionandcouldpossiblyslipduring
installation.
Becarefulwheninstallingthebrakereturnandadjustersprings.
2.Positionthereturnsprings(items7and15inFigure196)tothebrakeshoes.
3.Positionthebrakelever(item17inFigure196)tothebrakeshoes.Secure
thebrakelevertotheshoeswiththebrakeleverretainers.
4.Spreadtheupperendsofthebrakeshoes,andinstallthestarwheelsocket,
starwheeladjuster,andpivotnut.
5.Installtheadjusterspring(item13inFigure196).
6.Installthebrakedrumonthewheelstuds.
7.Securethebrakecabletothebrakeleverwiththeclevispin(item4inFigure
196)andcotterpin.Attachthebrakereturnspringtothebrakecablelink.
8.Installthewheelassemblytothefrontaxle;refertoInstallingtheWheel
(page7–5).
9.Checkandadjustthebrakes;refertotheTractionUnitOperator’sManual.
Groundsmaster
®
3280-D/3320
Page8–7
DriveAxles:ServiceandRepairs
05138SLRevB