Toro Groundsmaster 5900 Series - Page 455

OperatorSeatInstallation(Figure316)
g299267
Figure317
1.Seat3.T orxheadscrew−12mm(3)
2.Suspensionassembly
4.T orxheadscrew−16mm
1.Carefullypositionseattoseatsuspension.
2.Secureseattoseatsuspensionwithfour(4)T orxheadscrews(Figure317).
Makesurethatlongerscrewispositionedneartheseatadjustmenthandle.
Tightenscrewsfrom25N·m(18ft−lb).
3.Positionandsecureconsolearmassemblytoseat.Installallfasteners
beforefullytighteningthem.
A.Securesupportbracketatfrontrightcornerofseattosupportchannel
withangenutandcarriagescrew(item10).
B.Secureconsolesupporttocouplingnutwithcapscrew(item1)andlock
washer.
C.Placeatwasher,seatbeltreceptacle(item6)andspacerbetweenseat
andconsoleandsecurewithatwasherandcapscrew(item3).Tighten
capscrewfrom68to81N·m(50to60ft−lb).
D.Fullytightenallfastenerstosecureconsolesupporttoseatassembly.
4.Connectseatelectricalconnectortomachinewireharness.
Groundsmaster
®
5900&5910
Page7–41
Chassis:ServiceandRepairs
16227SLRevB