Toro Z Master Z597 - Page 30

3-9Z Master Z597 Diesel Service Manual
3
3. Carefully remove the control panel and control panel
shield by lifting the panel and sliding it to the middle
of the unit.
NOTE: It is not necessary to disconnect any cables
or wiring.
4. Unplug the 3 connectors that plug into the delay
module (Fig. 035).
Fig 035 DSC-1578
5. Remove the return fuel line, located on the inside of
the fuel tank (Fig. 036).
Fig 036 DSC-1565
6. Remove the fuel line, located under the front of the
fuel tank (Fig. 037).
Fig 037 DSC-1566
CHASSIS
2. Remove the 4 screws retaining the control panel and
control panel shield to the tank (Fig. 034).
Fig 034 DSC-1563