Toro Z Master Z597 - Page 75

4-22 Z Master Z597 Diesel Service Manual
4
Fig 194 DSC-2371
8. Remove the nylon tie strap to lower the fan mounting
plate and radiator assembly. Reinstall the 4 bolts
and nuts that retain the fan mounting plate to the
right and left upper frame and tighten the bolts,
including the front two nuts and bolts (Fig. 194).
HYDRAULIC SYSTEM
9. Install the two hose clamps; the large clamp
retaining the inlet cooling hose and the small clamp
for the overow hose to the radiator. Secure the
throttle cable to the clamp with a tie strap (Fig. 195).
Fig 195 DSC-2405
10. Install clamp, located on the left side of the unit, that
retains the hydraulic return line. Tighten the bolt and
nut (Fig. 196).
Fig 196 DSC-2372
Fig 197 DSC-2071
11. Install the engine access panel and the engine belt
shield with the two knobs (Fig. 197).