Toshiba B-EX4T2 SERIES - Page 80

2. PRINTER SETUP ENGLISH VERSION EO1-33094
2.9 Position and Print Tone Fine Adjustment
E2-66
2.9.1 Fine Adjustment (Cont.)
(5) TONE ADJ.(TRANS.)
Print tone for the thermal transfer printing is fine adjusted.
(6) TONE ADJ.(DIRECT.)
Print tone for the direct thermal printing is fine adjusted.
(7) RBN ADJ.<FW>
When the ribbon is slack or wrinkled and printing is affected,
fine adjust the ribbon motor torque.
+10
-20
+9
-19
Darker
Lighter
+0
Standard
+10
-20
+9
-19
Darker
Lighter
+0
Standard
+10
-15
+9
-14
High
Low
Motor torque
NOTE:
1. The fine adjustment value is
not effective for the reverse
rotation.
2. The fine adjustment value is
limited depending on the
print speed.
Value Print speed
-15 to 0 All speed
+1 to +5 8 ips or less
+6 to +10 6 ips or less