16
-EN
TOUCH SCREEN CONTROLLER for Air Conditioning Control System Owner's Manual
About advanced functions
▼ Alarm Reset
Transmits an error clear signal and eliminates error signals.
▼ Filter Sign Reset
Transmits a filter sign clear signal and clears the filter sign.
▼ Return Back
If a temperature is set that is lower (when cooling) or higher (when heating) than the Return Back temperature, which has been
set in advance, then the setting is automatically returned to the temperature set for the Return Back temperature after a certain
period of time. You can check the time and temperature of the Return Back setting.
▼ Reset Forced Thermo OFF
Clears the status of air conditioners that have had Forced Thermo OFF done to them by the demand signal from the digital I/O
interface.
▼ Save
Operates the air conditioners with suppressed performance. Settings are shown below.
Release: No power saving
Max: 99 - 50 % power saving
50: 50 % power saving
0: Thermo off
▼ Outdoor Demand
You can check the outdoor demand schedule, outdoor line, outdoor demand ratio set for the outdoor units that are connected.
▼ Eco Temperature Shift
The set temperatures are shifted in a batch by ±2 °C.
Example: +2 °C during cooling, -2 °C during heating
▼ Change Temperature Range
Set the upper and lower limits of the temperature for each mode (COOL, HEAT, DRY, AUTO).
To Next Page
Loading...
Need help?
General
