Toshiba e-studio281c - Page 105

3
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
COPY PROCESS
3 - 15
11.Fusing
1) Method
2) Cleaning
3) Heat roller tempera-
ture
4) Heater
1) Belt fusing system
- Fuser roller: Fluorinated iron
roller (ø40)
(IH coil: 700-1300W)
- Pressure roller: Silicon sponge
roller (Surface-PFA tube)
- Fuser belt: PFA tube belt (ø60)
- Separation roller: Ceramic
roller (ø20)
2) Oil roller method
- Oil roller (ø18)
- Cleaning roller (ø16)
3) ON/OFF control and power control
by thermistor
4) IH coil
←
←
←
Discharge brush
←
- Separation roller: Sponge roller (ø20)
←
←
←
←
←
Process e-STUDIO3511/4511 e-STUDIO281c/351c/451c