Toshiba e-studio281c - Disassembly and Replacement

6
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
SCANNER
6 - 17
6.8 Disassembly and Replacement
[A] Original glass
[B] Lens cover
(1) Take off the right upper cover ( P.2-28 "[H]
Right upper cover").
(2) Remove 2 screws and take off the fixing
bracket.
Fig. 6-19
(3) Take off the original glass.
Note:
When installing, fit 2 small protrusions of the-
original glass in the groove of the equipment
and fix the original glass with the fixing
bracket by pushing it to the left rear direction.
Fig. 6-20
(1) Take off the original glass ( P.6-17 "[A]
Original glass").
(2) Disconnect 1 connector, remove 6 screws
and take off the lens cover.
Fig. 6-21
Fixing bracket
Lens cover