2
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
2 - 25
2.5 Disassembly and Replacement of Covers
[A] Front cover
[B] Maintenance tray
(1) Open the front cover.
(2) Remove the toner bag ( P.11-10 "[A] Toner
bag").
(3) Pull up 2 hinge pins on the left and the right
and then extract them inside.
(4) Take off the front cover.
Fig. 2-21
(1) Remove 1 screw and take off the mainte-
nance tray.
Fig. 2-22
Hinge pin
Front cover
Maintenance tray
To Next Page
Loading...
