Toshiba e-studio281c - Construction

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
10 - 2
10.2 Construction
Feeding system
Drawer feeding unit Drawer pickup roller PM parts
Drawer feed roller PM parts
Drawer separation roller PM parts
Drawer feed clutch (CLT2, 3)
Drawer tray-up sensor (S27, 28)
Drawer empty sensor (S29, 30)
Drawer paper stock sensor (S31,32)
Bypass unit Bypass pickup roller PM parts
Bypass feed roller PM parts
Bypass separation roller PM parts
Bypass paper sensor (S35)
Bypass feed sensor (S36)
Bypass pickup solenoid (SOL3)
Bypass tray slide guide width detec-
tion PC board (SFB)
Bypass feed clutch (CLT6)
Registration roller
Transport roller
Registration clutch (CLT12)
Transport clutch
(CLT13, 14, 15, 16)
Drawer detection switch (S33, 34)
Drawer feed sensor (S23, 24)
Registration sensor (S22)
Transport motor (M9)
Tray-up motor (M10)