Toshiba e-studio281c - Initialization at Power-ON

6
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
SCANNER
6 - 7
6.4.3 Initialization at power-ON
The carriage moves to its home position and performs the peak detection.
Then it moves to the carriage waiting position and waits.
Fig. 6-8
YES
NO
YES
NO
YES
NO
Power ON
Carriage home
position sensor
ON
Carriage home
position sensor
OFF
Carriage home position
data set
Moving peak detection
position
Peak detection
Scanning command
Completion of
initialization
Moving carriage
waiting position
Scan motor rotating
(Moves to the forward
direction of carriage)
Carriage home
position sensor
ON
Error handling
Scan motor rotating
(Moves to the backward
direction of carriage)
Deceleration Stop
Deceleration Stop