Toshiba e-studio281c - Disassembly and Replacement

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DRUM RELATED SECTION
11 - 10
11.8 Disassembly and Replacement
[A] Toner bag
[B] Process unit
(1) Open the front cover and take off the toner
bag.
Fig. 11-6
(1) Take off the toner bag.
( P.11-10 "[A] Toner bag")
(2) Take off the black developer unit cover.
Fig. 11-7
(3) Open the toner cartridge holder. Then
remove 2 screws and take off the center
inner cover.
Fig. 11-8
Toner bag
Black developer unit cover
Center inner cover
Screw
Screw