e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 44
2.7 Removal and Installation of Options
[A] MR-3018 (Reversing Automatic Document Feeder (RADF))
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover.
Fig. 2-74
(3) Disconnect the connector.
Fig. 2-75
(4) Remove 1 screw and 1 washer on the rear
side.
Fig. 2-76
Connector cover
To Next Page
Loading...
