Toshiba e-studio281c - Page 63

2
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
2 - 43
[L] DRV board (DRV)
(1) Take off the LGC board case ( P.2-38 "[F]
LGC board case").
(2) Disconnect 4 connectors.
Fig. 2-72
(3) Remove 4 screws and take off the DRV
board.
Fig. 2-73
DRV board