Toshiba e-studio281c - 10 Paper Feeding System; General Descriptions

10
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
10 - 1
10. PAPER FEEDING SYSTEM
10.1 General Descriptions
This chapter explains how the system works to pick up paper from the drawer or bypass tray and trans-
port it to the 2nd transfer position.
The paper feeding system mainly consists of the pickup roller, feed roller, separation roller, transport
roller, registration roller, bypass paper sensor (S35), drawer empty sensor (S29, 30), drawer paper
stock sensor (S31, 32), bypass feed sensor (S36), drawer feed sensor (S23, 24), registration sensor
(S22) and drive system for these components. The transport motor (M9) drives the above rollers.
Refer to chapter 9 for more details about the transport motor (M9) and its drive system.
Fig. 10-1
No. Name No. Name
1 Bypass feed roller 10 Lower drawer pickup roller
2 Bypass separation roller 11 Bypass paper sensor (S35)
3 Bypass pickup roller 12 Registration sensor (S22)
4 Upper drawer feed roller 13 Registration roller (rubber roller)
5 Upper drawer separation roller 14 Registration roller (metal roller)
6 Upper drawer pickup roller 15 Upper drawer feed sensor (S23)
7 Transport roller 16 Lower drawer feed sensor (S24)
8 Lower drawer feed roller 17 Bypass feed sensor (S36)
9 Lower drawer separation roller
1
2
3
4
5
6
7
7
7
8
9
10
11
12
13
14
15
16
17
7