e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DRUM RELATED SECTION
11 - 2
11.2 Construction
Note:
Drum cleaner unit is the process unit with the transfer belt unit removed.
Drum cleaner unit
Drum PM parts
Drum thermistor (THM4)
Main charger unit Main charger grid PM parts
Charger wire PM parts
Wire pad PM parts
Cleaning blade PM parts
Recovery blade
Toner recovery auger
Drum cleaning brush PM parts
Discharge LED unit
Discharge LED
Ozone exhaust duct
Automatic wire
cleaning drive unit
Charger cleaner motor (M13)
Charger cleaner front position detection switch
(S25)
Charger cleaner rear position detection switch
(S26)
Temperature/Humidity sensor (S19)
Ozone filter PM parts
Ozone exhaust fan (M18)
Toner bag PM parts
Toner bag full detection sensor (S20)
High-voltage transformer
Image quality sensor (S17) Chapter 15
To Next Page
Loading...
