Toshiba e-studio281c - 3.5.7 Judgment threshold for ACS; 3.5.8 Sharpness adjustment; 3.7.5 Judgment threshold for ACS; 3.7.6 Sharpness adjustment

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
REVOLVER UNIT
13 - 8
13.7 Disassembly and Replacement
[A] Color toner cartridge sensor (S9)
[B] Internal cooling fan (M20)
(1) Take off the maintenance tray ( P.2-25 "[B]
Maintenance tray").
(2) Disconnect 1 connector. Loosen 1 screw and
take off the color toner cartridge sensor with
the whole bracket.
Fig. 13-4
(3) Disconnect the connector and remove
1screw and then take off the toner cartridge
sensor.
Fig. 13-5
(1) Take off the inner tray ( P.2-26 "[C] Inner
tray").
(2) Disconnect 1 connector and remove 2
screws. Then take off the internal cooling fan
together with the duct.
Fig. 13-6
Color toner cartridge sensor
Color toner cartridge sensor
Duct