Toshiba e-studio281c - 9 Drive System; General Description

9
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DRIVE SYSTEM
9 - 1
9. DRIVE SYSTEM
9.1 General Description
This chapter explains about each drive system of the main motor (M6), transport motor (M9) and devel-
oper motor (M11).
The function of each drive unit is as follows:
• Main motor (M6)
- Photoconductive drum
- Transfer belt
• Transport motor (M9)
- Fuser unit → Bridge unit (option)
- 2nd transfer roller
- Registration roller
- Transport roller
- Feed roller
- Bypass feed roller
• Revolver motor (M12)
- Revolver unit
• Developer motor (M11)
- Black developer unit
- Color developer unit
- Transfer belt cleaner clutch (CLT1)
• ADU motor (M5)
-ADU
• Exit motor (M7)
- Exit roller
• Toner motor (M3)
- Black toner cartridge
• Drum cleaner brush motor (M8)
- Drum cleaner brush
• Transfer belt cleaner auger motor (M2)
- Transfer belt cleaner auger