Toshiba e-studio281c - Disassembly and Replacement

12
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DEVELOPER UNIT
12 - 15
12.7 Disassembly and Replacement
[A] Black developer unit
[A-1] Black developer unit
(1) Open the front cover and take out the toner
bag ( P.11-10 "[A] Toner bag").
(2) Turn the black developer unit lifting lever to
the position where a clock hand could be at 9
o’clock and take off the black developer unit
cover.
Fig. 12-11
(3) Disconnect 2 connectors.
Fig. 12-12
(4) Remove 1 screw and pull out the black
developer unit.
Fig. 12-13
Black developer unit cover
Black developer unit