Toshiba e-studio281c - Detection of Abnormality; Types of Abnormality

4
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
GENERAL OPERATION
4 - 9
4.3 Detection of Abnormality
When something abnormal has occurred in the equipment, symbols corresponding to the type of abnor-
mality are displayed.
4.3.1 Types of abnormality
1) Abnormality cleared without turning OFF the door switch
(A) Add paper
(B) Paper misfeed in bypass
2) Abnormality not cleared without turning OFF the door switch
(C) Misfeed in equipment
(D) No toner in the cartridge
(E) Developer unit not installed properly
(F) Toner bag replacement
3) Abnormality not cleared without turning OFF the main switch
(G) Call for service