Toshiba e-studio281c - Disassembly and Replacement

5
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
CONTROL PANEL
5 - 15
5.5 Disassembly and Replacement
[A] Stopper
Note:
When taking off the control panel, check
the position of the stopper; if the stopper is
at the position “b”, remove the stopper or
move it to the position “a”.
Fig. 5-10
(1) Slide the stopper and pull it out.
Fig. 5-11
b
a
Stopper