Toshiba e-studio281c - 3.10 Adjustment of the Paper Feeding System; 3.10.1 Sheet sideways deviation caused by paper feeding

14
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
TRANSFER UNIT
14 - 5
14.4 Outline of 1st transfer
1) The transfer belt contacts with the photoconductive drum. Power voltage is applied through the 1st
transfer roller and it transfers the toner onto the transfer belt.
2) The transfer belt home position sensor-2 (S16) detects its home position and overlays four color
images.
3) When the transfer of the toner image from the transfer belt to the paper is completed in 2nd transfer,
residual toner on the transfer belt is scraped off by the transfer belt cleaning blade.