e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DRUM RELATED SECTION
11 - 4
8) High-voltage transformer
A circuit generates the output control voltage Vc of the main charger bias, main charger grid bias,
1st transfer roller bias, 2nd transfer roller bias, black developer bias, color developer bias and clean-
ing blade bias.
9) Temperature/humidity sensor (S19)
This sensor measures the environment inside the equipment. The values of the temperature and
humidity detected inside the equipment are output to the LGC board.
To Next Page
Loading...
